Technical Information
See articles and videos that relate to our products.
Halo DJD Driver information

Halo DJD Driver information
Created:
The following information is for customers who have a DJD rear hub and are having difficulty removing the sprocket.
This information relates to: HUHADBK6
Fixie Fork Dimensions

Fixie Fork Dimensions
Created:
FFX-45 700C Fixie Fork Technical drawing
This information relates to: FKITF47K
SP Dynamo Servicing

SP Dynamo Servicing
Created:
If you have an SP Dynamo hubs that requires servicing,
- please download, fill in and return the SP hub Service Request for Information form
This information relates to: HUSP978S
Halo Spin Doctor Rear hub bearing replacement
Halo Spin Doctor Rear hub bearing replacement
Created:
Instructions for how to change/replace the bearings in your Halo Spin Doctor rear hub.
This information relates to: HUHAM6R2K
Gusset - Pigmy 2 & 3 MTB type cranksets
Gusset - Pigmy and Wafen MTB/EURO type Bottom Bracket fitting instructions
Gusset - Pigmy and Wafen MTB/EURO type Bottom Bracket fitting instructions
Created:
Fitting instructions
Gusset - Pigmy BMX BB bearing fitting instructions
MRP lubrication instructions
MRP lubrication instructions
Created:
Please click here for important information regarding the use of lubricants and solvents on MRP chain devices
Rohloff Spoke Length Chart

Rohloff Spoke Length Chart
Created:
Recommended sopke lengths for : 29-28-26-24-20-18" wheels.
This information relates to: SKRO228
Salsa Minimalist Rack Fitting Instructions
Juzzi Stem Adjustment Instructions

Juzzi Stem Adjustment Instructions
Created:
Instructions for adjusting the Genetic Juzzi stem.
This information relates to: ASGEAS10
Halo hex skewer instruction error

Halo hex skewer instruction error
Created:
We have recently discovered a potentially serious text error with the instructions included on our Halo Skewer sets.
The issue relates to the stated torque denomination unit.The previous instructions noted “7 Ft-lbs” – where as it should have read “7Nm”.
The problem is that the incorrect 7Ft-lbs text is commonly read to mean 7 lb-ft which is equivalent to 9.5Nm.
This information relates to: HUHAQHD
MT Supadrive SS 142 x 12mm Axle Kit Dimensions

MT Supadrive SS 142 x 12mm Axle Kit Dimensions
Created:
Technical drawing
This information relates to: HUHAZSVSR2
Surly frame bag sizing chart
Surly frame bag sizing chart
Created:
Surly frame bag sizing chart. Helps you choose the correct bag for you Surly frame.
Crankset compatibility for Carbon frame Sarma Shaman
Crankset compatibility for Carbon frame Sarma Shaman
Created:
Crankset compatibility depends on size of chainline and it's distance to the center of the bottom bracket. To ensure compatibility of your crankset please check the pdf.
This information relates to: FMSMSK1C
Tire compatibility for Sarma Shaman
Tire compatibility for Sarma Shaman
Created:
Tire compatibility for Sarma Shaman
This information relates to: FMSMSK1C
Renthal Apex fitting instructions

Renthal Apex fitting instructions
Created:
Apex fitting instructions
This information relates to: ASRNAX4K
HUHARDR4KC halo technical information

HUHARDR4KC halo technical information
Created:
Technical information regarding the Halo 6D Road Disc Rear Hub
This information relates to: HUHARDR4KC
Gusset IASC EURO BB instructions

Gusset IASC EURO BB instructions
Created:
Instructions for Gusset IASC EURO BB
This information relates to: BBGUPE19
Problem Solvers Mismatch Adaptors
Problem Solvers Mismatch Adaptors
Created:
Instructions for Problem Solvers Mismatch Adaptors
This information relates to: BLPSMMA
Problem Solvers Chain Tensioners

Problem Solvers Chain Tensioners
Created:
Instructions for Problem Solvers Chain Tensioners
This information relates to: CHPS0900
Society Forks
Halo 6D Road Disc Hub Adapters

Halo 6D Road Disc Hub Adapters
Created:
Instructions for Halo 6D Road Disc Hub Adapters
This information relates to: HUHARDRBA5
Problem Solvers Brake Stud Light Mounts
Problem Solvers Brake Stud Light Mounts
Created:
Instrcutions for Problem Solvers Brake Stud Light Mounts
This information relates to: LTPSBSM
Salsa Alternator Racks
Salsa Alternator Racks
Created:
Instructions for Salsa Alternator Racks
This information relates to: RASARA3K
Surly Big Dummy Bags
Surly Big Dummy Bags
Created:
Instructions for Surly Big Dummy Bags
This information relates to: RASUBDB
Surly Dummy Deck

Surly Dummy Rails

Halo Carbaura rims and wheels
Halo Carbaura rims and wheels
Created:
Instructions on Halo Carbaura rims and wheels
This information relates to: RMHARC30
Genetic Hyoid Stem

Genetic Hyoid Stem
Created:
Instructions for Genetic Hyoid Stem
This information relates to: QSGEY10S
Gebla Rohbox instructions

Gebla Rohbox Brifter conversion

Gebla Rohbox Brifter conversion
Created:
How to convert Sram double tap levers for use with Gebla Rohbox
This information relates to: HUGBRB1
Universal universal road disc hubs explained

Universal universal road disc hubs explained
Created:
A detailed explanation of Halo’s 130/135mm universal road disc hub system
This information relates to: HUHARDR4KC
TSG Helmet Size Chart
TSG Pads and Gloves size chart
ODI Elite series grips fitting guide
ODI Elite series grips fitting guide
Created:
ODI Elite series grips fitting guide
This information relates to: HGODEMKK
Installation guide ODI Elite Pro Grips
Installation guide ODI Elite Pro Grips
Created:
Installation guide forvODI Elite Pro Grips
This information relates to: HGODEPKK
MRP Wave Ring technical information
MRP Wave Ring technical information
Created:
How an MRP Wave Ring works
This information relates to: CRMRW434
Surly Rack Fit Guide

Surly Rack Fit Guide
Created:
Compatibility Guide for Surly Racks
This information relates to: RASUNRF2S
MX8 cassette and derailleur compatibility

MX8 cassette and derailleur compatibility
Created:
MX8 11-speed wide ratio cassette and derailleur compatibility chart for Shimano and Sram
This information relates to: CSSRX8142Z
Ramp Control Upgrade Cartridge Instructions

Ramp Control Upgrade Cartridge Instructions
Created:
Installation guide for MRP Ramp Control Cartridges
This information relates to: FKMRU2171
Sunrace MTB shifter specifications

Sunrace MTB shifter specifications
Created:
Spec sheet for Sunrace trigger shifters
This information relates to: GLSRMS3R
Passport Natural Leather Cycling Mitts care guide

Passport Natural Leather Cycling Mitts care guide
Created:
Care guide for Passport Natural Leather Cycling Mitts
This information relates to: GVPPCML3
ODI Elite series grips fitting guide
ODI Elite series grips fitting guide
Created:
ODI Elite series grips fitting guide
This information relates to: HGODEFKK
Surly Moloko Bars instructions
Surly Moloko Bars instructions
Created:
Instructions for Moloko handlebars
This information relates to: HBSUML27K
MRP Fork Set up guide

Rohloff Spokes

ENE 11 Speed shifter instructions

ENE 11 Speed shifter instructions
Created:
Instructions for ENE Downtube Shift Levers
This information relates to: GLDCED11S
YST Eccentric Bottom Bracket

YST Eccentric Bottom Bracket
Created:
YST Eccentric Bottom Bracket instructions and dimensions
This information relates to: BBYSEC68K
Maximum tyre pressure on Halo rims

Maximum tyre pressure on Halo rims
Created:
As a maximum, always use the lower value offered by either the tyre or the rim.
1. Follow the tyre manufacturers guidelines for tyre pressure in use. Never exceed the tyre’s maximum rated pressure.
2. Maximum* recommended tyre pressures for use with Halo rims.
i) Up to 25C width 120 Psi
ii) Up to 32C width 90 Psi
iii) Up to 40C width 80 Psi
iv) Up to 55C (2.2”) 65 Psi
v) Up to 75C (3”) 50 Psi
*Maximum pressure is the maximum, it is not the pressure we recommend you use. Always follow the tyre use guidelines.
This information relates to: RMHAV92B
YST Threadless External BB Shimano

YST Threadless External BB Shimano
Created:
Instructions for fitting YST Threadless External BB - Shimano
This information relates to: BBYSTLEK
YST Threadless External BB SRAM

YST Threadless External BB SRAM
Created:
Instructions for YST Threadless External BB SRAM
This information relates to: BBYSTLEK
Genetic Metazoa Instructions
Genetic Metazoa Instructions
Created:
Instructions for the Genetic Metazoa stem
This information relates to: BCGERMFK
Dia Compe DC 980 instructions

Dia Compe DC 980 instructions
Created:
Instructions for the Dia-compe DC 980 cantilever brake
This information relates to: BCDC980RS
S2 stem instructions

Gusset S2 DM Stem instructions

Gusset S2 DM Stem instructions
Created:
Instructions for the Gusset S2 DM Stem instructions
This information relates to: ASGU2D54K
12mm Thru axle fork and hub compatibility

12mm Thru axle fork and hub compatibility
Created:
12mm Thru axle fork and hub compatibility
Some 12mm thru axle forks are only compatible with hubs which have end cones with a maximum outer diameter of 19mm. Several thru axle hubs have end cone outer diameters larger than 19mm (typically 21mm) and will not fit into the recessed area under the hub location lip.
To check the compatibility of your 12mm axle fork with any thru axle hub, measure distance ‘A’ in the diagram.
If ‘A’ is less than 4.5mm you can only use a hub that has a maximum outer diameter end cone size of 19mm. If ‘A’ is 4.5mm the fork should accept a hub using 21mm end cones.
If in doubt please consult your local dealer.
This information relates to: HXHAA1512F
Edge 22 Information Sheet

Edge 22 Information Sheet
Created:
PDF of Tioga Edge 22 technical infomation
This information relates to: TYTG27E225
Tioga Binary information
Tioga Binary information
Created:
PDF of Tioga Binary technical information
This information relates to: TYTG70BF40
YST Threadless Cartridge BB Instructions

YST Threadless Cartridge BB Instructions
Created:
Instructions for YST BB993 Threadless Bottom Bracket
This information relates to: BBIDT810
Rebate V adaptors instructions

Rebate V adaptors instructions
Created:
Fitting instructions for Identiti Rebate V-adaptors
This information relates to: FKITRBA
ShockStop Computer Mount Instructions

ShockStop Computer Mount Instructions
Created:
Instructions for Redshift ShockStop Computer Mount
This information relates to: ASRE4101
Slat Wall Wheel Display Skewer Kit instructions

Slat Wall Wheel Display Skewer Kit instructions
Created:
Fitting instructions
This information relates to: PRHAWDSL
Spoke lengths
Spoke lengths
Created:
Follow link for spoke lengths and other technical information
This information relates to: WHHARL7VK
KS Service and warranty information

KS Service and warranty information
Created:
SERVICING AND WARRANTY INFORMATION
If you are looking for KS warranty & servicing we have teamed up with Shane Botha, who has been handling all the KS servicing and warranty for the last 3 years and is set to continue with this support under his company: Panorama Cycles.
Please click the link below to take you to a booking form
panoramacycles.co.uk/service-warranty-booking
Alternatively, Panorama Cycles can be contacted via phone on 07759 093283 or email on info@panoramacycles.co.uk
This information relates to: SPKSZW4209
Schwalbe Natural Bike Soap instructions

Schwalbe Natural Bike Soap instructions
Created:
Cleaning instructions
This information relates to: LUSE4711
Benno Safety Instructions
Benno Safety Instructions
Created:
Particularly important when riding with passengers
This information relates to: 5BN20BECSB
Benno 46er wheel guard instructions

Benno 46er wheel guard instructions
Created:
Benno 46er wheel guard instructions
This information relates to: RABNW2006
Benno Half Rail Plus instructions

Benno Half Rail Plus instructions
Created:
Half Rail Plus Installation manual
This information relates to: RABNR0005
Benno High Rail Plus instructions

Benno High Rail Plus instructions
Created:
Installation manual
This information relates to: RABNR0003
Benno Rack Pad instructions

Benno 46er Poly Guard instructions

Benno 46er Poly Guard instructions
Created:
Installation manual
This information relates to: RABNF2003
Benno Sideloader Poly Wheel Guard instructions

Benno Sideloader Poly Wheel Guard instructions
Created:
Installation manual
This information relates to: RABNF2004
Benno Mini Sideloader instructions

Benno Mini Sideloader instructions
Created:
Installation manual
This information relates to: RABNF8004
Box Tyre Specifications

Understanding the 16 8E spoking system
Understanding the 16 8E spoking system
Created:
The Halo Aero spokes used are both light weight and provide a degree of compliance which benefits comfort levels over poor road surfaces...
This information relates to: WHHAM6KF
Frame and Hub spacing information

Frame and Hub spacing information
Created:
Hubs need to match the frame and fork they are used in.
The spacing of a frame/fork is measured from the inside surfaces of the dropouts, where they come into contact with the locknuts of the wheel's axle.
The hub spacing is measured from the outside face of the lock nuts (or equivalent) , this is commonly called the "O.L.D." (Over-Lock-nut Dimension)
Common Sizes
- 100mm – Modern front hubs, including quick release and some thru axle types.
- 110mm – Some thru axle front hubs including 20mm and boost standards
- 110mm rear – B.M.X
- 120mm rear – Modern Track hubs
- 126mm rear – Older 5 and 6 speed road bikes
- 130mm rear – non-disc road bikes
- 135mm rear – QR MTB, Most QR disc road bikes
- 142mm rear – thru axle rear hubs
- 148mm – boost standard thru axle rear hubs
This information relates to: HUHAQRD
Whisky No9 Carbon Handlebar Recall

Whisky No9 Carbon Handlebar Recall
Created:
WHISKY No.9 12F and No.9 24F Carbon Drop Handlebars
Ison Distribution has recently become aware of reports of some of these handlebars
cracking where the brake/shift levers are installed. This issue has the potential to
cause a crash and serious injury to the rider.
Customer safety and satisfaction are our highest priorities. We are therefore
conducting an immediate recall of these Handlebars.
This information relates to: HBWY2662
Procore Fitting
Created: