XL Hex Key Skewers

Lightweight Cr-Mo threaded rod with an hex key fitting and coloured alloy end covers.

The absence of any lever means these skewers offer improved security and reduced weight over a traditional QR skewer.

Features a steel 'no-turn tab' to prevent the end cone from rotating whilst doing up or removing. There's also a 15 x 3mm cone spanner recess cut into nut, just in case the ‘no-turn’ tab cannot operate.

Features:

  • Cr-Mo rods
  • Steel 'no-turn’ tabbed washer insert
  • Serrated alloy frame grip surfaces
  • 15mm cone spanner holding back-up on nut
  • Black, Gold anodised or White Powdercoated.

Maximum width skewers can be used with:

Front 122mm - (100mm hub width, plus 11mm dropout either side)

Rear 155mm - (135mm hub width, plus 10mm dropout either side)

 

Standard Length versions also available.

Torque setting: 7Nm*

 

Please note that there was a packaging error that was rectified in 2014 that states the Torque Setting to be 7 ft/lbs. This was incorrect, it should be 7Nm. If you have any questions please contact us: sales@ison-distribution.com

Important information: Not recommended for aggressive off road use.

Halo XL Hex Key Skewers
Halo XL Hex Key Skewers
Click image to enlarge
Information

To find out where to buy  Click Here

Description Colour Size Wt(g) Part No. Stock Lvl RRP Pack Unit
XL Hex Key Skewers, Alloy ends , XL Cr-Mo shafts, Anti-Slip Nut, suit thick (10mm) DropoutsGoldXL73HUHAQHXD£8.99Pair 
XL Hex Key Skewers, Alloy ends , XL Cr-Mo shafts, Anti-Slip Nut, suit thick (10mm) DropoutsBlackXL73HUHAQHXK£8.99Pair 
XL Hex Key Skewers, Alloy ends , XL Cr-Mo shafts, Anti-Slip Nut, suit thick (10mm) DropoutsWhiteXL73HUHAQHXW£8.99Pair 
  • Good stock levels
  • +24h Please allow 24/48 hrs for assembly
  • Special Order Currently not in stock, contact us for details
  • Out of stock. Expected availability date will be displayed if known.
  • Discontinued. This product is no longer available.
Description Colour Size Wt(g) Part No. Stock Lvl RRP Pack Unit
XL Hex Key Skewers, Alloy ends , XL Cr-Mo shafts, Anti-Slip Nut, suit thick (10mm) DropoutsGoldXL73HUHAQHXD£8.99Pair 
XL Hex Key Skewers, Alloy ends , XL Cr-Mo shafts, Anti-Slip Nut, suit thick (10mm) DropoutsBlackXL73HUHAQHXK£8.99Pair 
XL Hex Key Skewers, Alloy ends , XL Cr-Mo shafts, Anti-Slip Nut, suit thick (10mm) DropoutsWhiteXL73HUHAQHXW£8.99Pair 
  • Good stock levels
  • +24h Please allow 24/48 hrs for assembly
  • Special Order Currently not in stock, contact us for details
  • Out of stock. Expected availability date will be displayed if known.
  • Discontinued. This product is no longer available.